School apron – pattern and master class

For both novice and seasoned sewers, making a school apron can be a rewarding and useful sewing project. It’s an opportunity to create something useful and original with a dash of flair for yourself.

This article provides a master class that walks you through the process step-by-step and a basic pattern. This tutorial will assist you in creating a well-fitting, well-made apron for your child, whether it’s for a school uniform or just a fun addition to their wardrobe.

Get your materials and fabric ready, then let’s get started on this fun sewing project that blends practicality and a dash of style.

Master class on making a white apron from guipure taking measurements and cutting

The only limits on the final product’s appearance are your imagination and the amount of material available. The apron model can be long, short, rounded, square, with or without folds, and with an abundance of lace trim. However, the largest lower portion, bib, two straps, belt, and frills are the same pattern parts found on all versions of the school white apron.

Use the standard school apron pattern to build the design.

To perform the work of sewing a school white apron, you will need

The supplies needed to begin making a school uniform apron are a measuring tape, a sewing machine, and an overlock stitch. If you don’t have an overlock stitcher, you can use any sewing machine to replace the overlock stitch with a regular zigzag stitch. If the width of the fabric is greater than 1.5 meters, you can replace the guipure tape, which is 4 cm wide and 10 m long, with an appropriate lace tape, white thread, English needles, and scissors.

How to take measurements

The height, waist, hips, chest, length of the straps, and belt are all taken into consideration when creating the pattern. Every measurement is obtained wearing a school uniform. You will need an additional person’s assistance to make calculations that are more precise.

Depending on the model, the belt’s length determines whether the apron is tied or buttoned. If the model is wearing a button, add 3.5 cm to the waist measurement; if the model is wearing ties, add 35 to 45 cm. No wider than 3–4 cm for the belt. The belt in the guipure model is constructed from pre-made lace or ribbon.

Three to six centimeters above the dress’s hem is how long the apron should be. If not, it will have an ugly appearance.

The hip volume is equal to the width of the apron along its lower edge. It is made equal to half the waist volume along the top edge plus an additional 4 cm for darts or folds. The resulting pattern has rounded lower edges because a guipure ribbon or lace frill will be sewn along the edge.

Pattern of the upper parts of the apron

An apron pattern for school can be found in a magazine where the sizes have already been set to the norm. Even a ready-made pattern needs to be altered to fit the figure because of the peculiarities of the figure structure, which could lead to an unsatisfactory outcome.

The following method is used to get the desired length of the straps: a 4 cm wide centimeter tape is applied over the shoulder, from the front waist line to the back waist line. Depending on the model, use guipure ribbon that is 10 to 15 cm longer than the straps for the frill.

The bib pattern is shaped like a rectangle that narrows toward the bottom. Its height should be between 5 and 6 cm above the chest volume line, and its width shouldn’t be greater than the space between the chest’s protrusion points.

One-centimeter allowances on both edges must be considered when cutting.

Sewing sequence for an apron

Here are detailed instructions on how to sew a school apron by hand:

Step 1: Use a sewing machine to sew the straps together by folding them in half. Using an overlocker or zigzag stitch, the frills are attached to the straps; if the model has folds in the frills, they must be distributed evenly before beginning the overcasting process. A straight line is sewn on the front side and the seam is ironed to the side of the straps.

Step 2: Sew a frill along the lengthiest portion of the apron using the same technique.

Step 3: Sew lace, making a small pleat, onto the bib’s top.

Step 4: The finishing line is stitched and the straps are ironed onto the bib.

Step 5: Fasten the bib to the belt using the straps.

Step 6: Make symmetrical dart-like folds on the lower portion of the apron using embroidery thread.

Step 7: Iron, connect the top and bottom sections, and mark the finish line.

Step 8: Put on the apron and, with the assistance of a helper, mark the location where the straps should be sewn to the belt.

Video master class on sewing a white school apron

With the correct pattern and instructions, anyone can successfully complete the enjoyable and useful project of making a school apron from scratch. For both novice and seasoned sewers, this article offers a clear, step-by-step master class on creating a traditional school apron. You’ll discover how to select the appropriate fabric, cut out the pattern, and sew a long-lasting, fashionable apron that will be worn throughout the academic year with easy-to-follow directions and practical advice.

The second version of the pattern of a school apron made of crepe

The crepe apron is unique in that it is composed entirely of a single material.

You will need the following supplies to make an apron: elastic thread, snow-white crepe measuring 2 meters in length and 1.5 meters in width.

Pattern

The school apron patterns from the earlier construction work well for sewing. But keep in mind that the material has a lovely appearance, so don’t cut corners when it comes to folds and frills.

Master class on how to cut and sew a school apron

Making a school apron out of crepe by hand is quite easy; the sewing technique is essentially the same as putting together an apron made of guipure with a few minor adjustments. Seam allowances need to be considered when cutting.

Gather one edge of the frill for the lower portion using an elastic thread. Flounce length: 2 m, width: 6–8 cm. An overlock is used to process the other edge. Sew, topstitch, and join the frill’s edge to the lower part’s elastic band.

The bib’s upper edge is finished with an overlock, folded to the incorrect side, and laid flat.

Cut two pieces with a fold for the straps, join them, and stitch around the edge.

Strap flutters are trimmed at the ends, sewn together on one side, and stitched through an elastic band on the other. Sew, iron, and attach the straps and frills.

Connecting the straps and bib.

Belt, folded and cut out in one piece. Iron, turn out, and sew. Join the belt, bottom, and top.

Making a school apron using a well-planned pattern can be a useful and rewarding project. You can learn how to make an apron that looks amazing and can withstand regular use by taking the master class.

By choosing your own fabrics and altering the design to suit your requirements, you can personalize each apron. Not only is the outcome a practical garment, but it also showcases your creativity and hard work.

Learning how to sew a school apron can give even something as basic as everyday schoolwear a personalized touch, whether it’s for a school uniform or just a fun sewing project.

Video on the topic

How to process a school apron with a roll for 5 rubles.

Sewing an apron for GRADUATION step-by-step lesson | I Want to Sew

DIY School Apron

mk school apron in an evening

DIY: DIY School Apron. Pattern. How to sew a school apron.

Modeling and sewing an apron for a school uniform Making a pattern Preparing for September 1 Part 1