Patterns, sewing and sewing a stand-up collar to a shirt

A classic design that gives a shirt structure and style is the stand-up collar. Gaining mastery over this design element will help you sew clothes for both formal and casual occasions, taking your sewing to the next level.

The main procedures for making and fastening a stand-up collar to a shirt are covered in this tutorial. We’ll guide you through every step of the process, from selecting the ideal pattern to producing a tidy and polished finish.

This article offers step-by-step instructions and helpful hints to enable you to confidently sew a stand-up collar that fits and looks great, regardless of your level of sewing experience.

How to design

The fundamental rule is to model the neck itself before attempting to design the collar’s shape. Selecting the appropriate neck width and depth is crucial. The form and style of the stand-up collar are established by these parameters.

1. The stand-up collar style is selected.
2. Next, the size of the neck is determined – depth, width and height.
3. Then a drawing-pattern is made.
4. Next, the pattern is transferred to the fabric – templates are prepared.

Numerous options for stand-up collars are integrated into the product’s shelves and backs. The idea of creating extra darts must be closely adhered to.

Cut of a stand-up collar with a shawl lapel

Using a single piece of shelving, a stand-up collar with a shawl lapel can be made quickly and precisely. Here, a standard stand-up collar becomes a lapel, which loosely resembles a shawl. How to create a pattern for this kind of element in case the shelf is ready:

1. You need to make a cut from the neck to the point where the center will be located.
2. Connect the side darts located on the chest. In this case, you need to raise about 0.7 cm to the neck, and lower the rest to the waist.
3. Wide the neckline on the shoulder by 1.5 cm, on the back – 1 cm. It is necessary to make a new drawing in the area of ​​the back in relation to the middle line.
4. It is necessary to form auxiliary lines. Which will pass through the extreme points of the neck, back and shelf.
5. From the tops of the updated neck in the area of ​​the shelves and back, draw perpendiculars to the auxiliary lines. Along them, the height of the stand is set aside – 4 cm. Continue the middle line on the back upwards, set aside the height of the stand – 4.5 cm.
6. Parallel to the middle line of the shelf, draw a straight line for the edge, side and bend of the lapel, determine the location of the buttons. Organize the cuts of the lapel and collar.

The clothing item’s elegant shape will be perfectly complemented by a clasp situated at the bottom of the lapel. This element’s version is perfect for a jacket or a coat made of natural fur.

One-piece stand with a shelf and a back

1. Form an additional dart that will move along the convexity of the shoulder blade to the upper cut of the neck (stand).
2. You need to add 0.5 cm on each side to these sections. This will allow you to lengthen the cut on the back.
3. It is necessary to shorten the bulge for the shoulder blades by 9-10 cm. Move from neck to back.

It’s important to accurately determine the direction of the main thread before beginning to make a fabric.

Ground-stand adjacent to the neck

The ground-stand next to the neck, whose design follows a very straightforward plan, has a striking appearance. This kind of look is thought to be especially appropriate when showcasing a blouse. It is worthwhile to use the following scheme in order to precisely finish the construction:

This option is typically sturdy with a back and shelf. This kind of fixation makes the process of making such an element easier.

Products with a seam in the center of the back

1. Connect the sides from the sides of the dart on the chest and temporarily transfer the straight lines to the side line.
2. Turn the neckline along the shoulder of the shelf and back by 2 cm.
3. Deepen the neckline notch by 1 cm in the center of the back.
4. Draw a new neckline on the back at a right angle to the center line of the shelf
5. Draw an additional line passing through the extreme points of the enlarged neckline only on the shelves. Extend this element of the pattern so that it is equal to the length of the constructed neckline of the back.
6. From the last point, draw a perpendicular to the auxiliary line 1.5 cm long. The distance is determined by the features of the model.
7. The angle of inclination of the back of the collar depends on the presented value. Draw the line of the lower cut on the back. Draw the center line at an angle of 90 degrees to the formed line.

Draw a line perpendicular to the auxiliary line from the top of the shelf’s turned neckline, using it to mark off the height. Along the center line, make 4.5 cm. Sketch the collar’s upper cut in a line.

Turn-down collar with a cut-off stand

1. The neckline in the area of ​​the shoulders, back and shelves is increased by 2.5 cm.
2. Additionally, the shelves are deepened by 4.5 cm and the back by 1 cm.
3. A parallel is drawn relative to the middle of the shelf, which will determine the edges of the side.
4. A line is formed that determines the bend of the lapel. Additionally, it is necessary to mark the places for the loops and buttons.
5. Contour definitions of the lapels are depicted on the shelf of the pattern itself.
6. Construct a cut-off stand-up collar using a right angle. Measure the length of the updated neckline in the area of ​​the shelf and back.
7. Put this value along the horizontal line of the original point. From it, put up 3 cm vertically to form the value of the rise of the front part and draw the lower cut. The height along the middle line will be 4 cm.

Verify all of the cuts at the dart junctions, ascertain the warp thread’s direction, and indicate it on the pattern.

Shirt collar on a stand

The most common and straightforwardly cut shirt stand is the one available for both men and women. This scheme can be used to calculate and create a preliminary modeling plan:

The fundamental dimensions and structural elements of the sketch are followed in creating the collar pattern. The fly, the fold line, and the stand itself are the only three fundamental components. Once all the parameters have been determined, you can obtain the perfect shirt decoration element.

Rectangular stand-up collar

1. From the starting point, two widths of the stand in finished form are measured up, and 2 basic points are put.
2. It is advisable to build a pattern to determine ½ of the entire collar.
3. A segment is built horizontally from the first point, another segment is laid off horizontally from point C.
4. Connect the basic (horizontal) points of the first edge with a straight line.
5. The bottom line is a fold.

It is important to precisely identify the parameters and draw lines with the appropriate geometry in order to guarantee that every component of the product is even and uniform.

Cutting

1. Cut out the part from paper.
2. Apply the blank to the fabric.
3. Transfer all lines and silhouettes to the textile.
4. Sweep and prepare the base elements.

Additional fabrics are frequently used because fur and other dense fabrics don’t require a significant seam allowance. They serve as linings to improve the evenness of the main material’s lying.

Processing technology

1. First, you need to glue the collar.
2. Sew the parts together.
3. Smooth out the allowances.
4. Fix the parts of the lower and upper stands.
5. Stitch on a sewing machine.
6. Trimming the edges of the collar.

When using natural materials, you can’t rely on their malleability.

If the model’s size or shape are too complicated, there might be more stages.

Accurate measurements and close attention to detail are necessary when securing a stand-up collar to a shirt. Even though the procedure might seem difficult at first, it is easier to follow if it is broken down into small steps.

Smooth sewing is ensured by starting with the correct pattern and cutting your fabric correctly. A neat and polished finish is achieved by carefully stitching the collar pieces into place with precise alignment.

Even a novice sewer can become proficient at sewing a stand-up collar with time and effort. For anyone interested in sewing, knowing how to make this classic collar style is a valuable and versatile skill that elevates any shirt.

To achieve a clean, polished finish when sewing a stand-up collar onto a shirt, meticulous attention to detail and pattern alignment are necessary. From preparing the fabric and cutting the collar pattern to seamlessly assembling and attaching it, this guide covers all the necessary steps. Using these pointers will guarantee that your stand-up collar fits flawlessly on any shirt, regardless of your sewing skill level.

Video on the topic

How to sew a linen shirt without a pattern? Shirt for beginners. Part 3. Stand-up collar.

Processing a shirt collar on a cut-off stand (master class on sewing)

Types of collars. Turn-down collar

Shirt collar

Sew a stand into the neck of the product. #sewing #sew #sew #stand

A little trick for a shirt collar