The one-piece sleeve, with its seamless appearance and elegant lines, is a classic component of apparel design. A one-piece sleeve is cut in one continuous piece with the body of the garment, as opposed to traditional sleeves, which are sewn separately and attached to the garment. This style is well-liked for both formal and casual wear since it produces a sleek and attractive appearance.
Precision is essential when modeling and cutting a single-piece sleeve. Careful measurement and pattern tweaking are required to guarantee that the sleeve fits flawlessly without restricting range of motion. Comprehending the subtleties of fabric stretch and drape can yield notable variations in the outcome.
Although sewing a one-piece sleeve might seem difficult at first, it can actually be a simple and satisfying task if you use the right techniques. Whether you’re a novice or an expert tailor, learning this method opens up a whole new realm of design possibilities. You can make clothing that fits well and looks fantastic with a little practice.
| Step | Description |
| Modeling | Draw the basic shape of the sleeve on paper, including the shoulder line. Make sure the sleeve is wide enough for comfortable movement. |
| Cutting | Cut out the sleeve pattern from fabric, following the drawn outline. Be sure to leave extra fabric for seams. |
| Sewing | Attach the sleeve to the armhole of the garment, carefully matching the edges. Sew along the seam, ensuring it is secure and neat. |
- Features of cutting clothes with a one-piece sleeve
- Who suits it
- Who does not suit
- What types of one-piece sleeves are there
- Constructing a pattern for a one-piece sleeve with a gusset
- Ready-made patterns for dresses with one-piece sleeves
- How to sew a dress with one-piece sleeves without a pattern
- Description
- Video on the topic
- We build a pattern one-piece sleeve with a dart from the side seam / for large sizes / Plus Size
- Five rules for constructing the correct one-piece sleeve. How to build an ideal sleeve
- How to quickly sew a linseed shirt without a pattern? A shirt for beginners. Part 1. Building and cutting
- Pattern base the base of the whole -cut sleeve / simple construction
- Building a short one -piece sleeve.
- Errors in building a pattern of one -piece sleeve
Features of cutting clothes with a one-piece sleeve
A one-piece sleeve, as the name implies, is one that unites the front shelf and the back section at the back into a single unit. In these models, the sleeve and bodice are cut out together, and there is no stitching line.
There are three possible sleeve lengths: short, 3/4, and long. The bodice is cut so freely that it falls in lovely, gentle folds.
Who suits it
These models are perfect for curvaceous women with large hips. This type of cut balances the silhouette by boosting the volume at the top. Depending on the fabric, a bodice cut out in one piece with the sleeves may result in subtle or noticeable folds. A one-piece sleeve also lets you conceal wider shoulders. Shoulder pads that visually widen and straighten the shoulders can be used, if needed, when modeling such clothing. The best models for this type of cut will be those with excessively full or thin arms.
One-piece sleeves allow for a seamless and elegant look without the need for a separate shoulder seam, making them an essential skill in garment design. From modeling and cutting to sewing, we’ll walk you through the entire process in this post and provide helpful advice to help you produce results that look professional. Regardless of your level of sewing experience, learning how to make a one-piece sleeve will improve your capacity to make lovely, well-fitting garments.
Who does not suit
These models are best used with caution by short women because a large top will visually make the figure even more squat. Women with "apple" figure types ought to select different styles. A one-piece sleeve gives the figure unwelcome bulk and expands the chest’s capacity.
What types of one-piece sleeves are there
We can get various options by varying the angle of the top line.
We get a soft bodice and a free armhole area if the angle is small or equal to zero. A "bat" is one type of such sleeve.
We obtain a distinctly defined bodice by increasing the angle of inclination. A model of a kimono is one example.
A gusset is frequently used when making one-piece sleeves. This extra feature allows for flexibility in movement.
Constructing a pattern for a one-piece sleeve with a gusset
Let us examine two varieties of gussets:
- providing a 180-degree arm lift;
- providing a 90-degree arm lift.
We’ll utilize a one-seam set-in sleeve pattern as our foundational design.
Place it on a piece of paper. Stretch the sleeve’s center line 0.6 cm above the armhole. At this point (∙), draw a horizontal line.
Mark (∙) X along the side contours, 3.8 cm from the start of the armhole line.
Cut the elbow dart down to 0.6 cm. Make up for this decrease by moving the lower edge of the back panel by an equal amount.
When sewing, draw the dart’s remaining size in the shape of a fit. As seen in the drawing below, make notches.
Follow the design and move the dart from the shoulder blades’ convexity to the back armhole’s line. Transfer a portion of the bust dart’s size to the front armhole. Along the side contours of the back and front, measure down 6.4 cm from the armhole level and mark (∙) X.
Align the points X and apply the back to the armhole’s back line. In this instance, the shoulder’s lower point ought to land on the horizontal guide. Let’s assign it a (∙) A.
Continue with the front piece as before.
In the direction of the armhole bend, draw a 9 cm segment from (∙) X, and place it in (∙) B.
Mark (∙) Z in the center of the segment, following the horizontal guide between (∙) A.
Set aside 2.5 cm along the bottom line to the right, and mark (∙) Y. To obtain the upper seam’s outline, join Y and Z. Trim the sleeve in this direction.
Draw distinct designs for the front using the sleeve’s front piece and the back using the sleeve’s back piece. Remember to keep the gusset cut lines in mind.
Draw the upper cut lines as shown in the pictures below.
The tutorial for creating a pattern for a blouse featuring an undercut and a one-piece sleeve can be found in the video below, featuring Irina Paukshte.
In the following video, Irina Paukshte demonstrates how to quickly construct a jacket using a self-made pattern for a one-piece sleeve shoulder garment.
To learn how to quickly sew an original dress, watch the video featuring Irina Paukshte below.
Ready-made patterns for dresses with one-piece sleeves
The following sizes’ patterns are designed for a height of 168 cm:
How to sew a dress with one-piece sleeves without a pattern
- thick knitwear – 3 m;
- threads, sewing accessories.
Description
Pin the material together after folding it in four with the right side facing inward.
Ascertain the dress’s length. We’re going to sew a floor-length dress in our instance. Furthermore, a measurement of the hip circumference is required.
Aside from the fold’s edge, leave 1/4 OB plus 2… 3 cm. Make a line.
To create a one-piece sleeve pattern, draw a line 25 cm from the upper fold. Should you wish to sew a dress with a different sleeve width, you must take the necessary measurements right away, without factoring in a fitting adjustment.
Turn the corner and spread the dress’s lower hem a little. The neck size can be calculated by measuring the circumference of the head and deducting 5 cm (to allow for good fabric stretch). defining the neckline. The design is complete.
Cut out in accordance with the labels.
We receive a dress that is cut without shoulder seams and darts.
Overlock the side seams using four threads.
We try it on and change the dress’s length. Hem the lower edges and process them with an overlock. If you’d like, you can embellish the hem with an adhesive web.
We made blanks to go on the cuffs. While the parts’ height is optional, their length is determined by the measurement of the wrist. With the wrong side facing out, fold in half and sew into a tube using an overlock.
We remove a facing after processing the neckline. Its length is determined by the measurement that was taken, and its width is 40 cm, which can be changed as needed.
To create a ring, sew the facing.
Sew the facing with the above-mentioned technology.
The long one-piece sleeve dress is ready!
Although making a one-piece sleeve might seem difficult at first, it can be enjoyable if you pay close attention to every little detail. The secret is to take your time when cutting and sewing, and to make sure your measurements are precise.
After you’ve gotten the hang of the fundamentals, you can begin experimenting with various materials and designs. This will enable you to personalize each item of clothing, making it genuinely one-of-a-kind.
Recall that practice makes perfect. Your confidence in your ability to work with one-piece sleeves will grow with practice. Savor the process of using your hands to create something exquisite.
