Kimono with a one-piece sleeve – we cut and sew clothes in the Japanese style

Embracing the art of Japanese apparel, the kimono is a standout piece of apparel recognized for its rich cultural legacy and elegant simplicity. Among its various styles, the one-piece sleeve kimono is especially beloved for its distinctive fusion of traditional pattern and contemporary appeal.

Making your own one-piece sleeve kimono is a timeless craft that lets you express your individuality while personalizing the outfit. Even though the process may seem complicated, it can be rewarding and pleasurable if you follow the right instructions and have a little patience.

This project provides an excellent opportunity to learn about Japanese fashion and craftsmanship, regardless of experience level. Let’s get started on the procedures and advice that will enable you to cut and sew a kimono in this sophisticated style.

Step Description
1 Choose your fabric
2 Measure and cut the fabric according to the pattern
3 Sew the shoulder seams
4 Attach the sleeves
5 Finish the neckline and hem
6 Try on the kimono and make adjustments if needed

Kimono dress

This simple women’s kimono model is constructed without any extra embellishments and does not have a zipper. Such a dress is even capable of being sewn by a novice. The perfect fabric would be something stretchy with edges that won’t fray.

Before sewing, you must get ready:

  • fabric, thin knitwear, quantity depends on the length of the dress and the length of the sleeves;
  • elastic tape of medium width;
  • thread, sewing tool.

Constructing a pattern

We start with a straight dress pattern that fits our size. The sleeve is modeled after the one in the following figure. We choose the length of the sleeves based on our preferences.

How to cut and sew

The bodice of the dress is cut off, and the waist is 3–4 cm high. We measure to get the desired height of the bodice, allow 2.5–3.0 cm, and then cut out four identical pieces.

We take into consideration the expansion down by 5–6 cm and the increase for gathering along the waist line when measuring the necessary length of the skirt and cutting out the panel.

By trying the elastic band on, we can measure the necessary length and cut it without making any seam allowances.

We bind the back bodice with ties. We stitch in the ties before creating the shoulder seams. We use an overlock to process the edges if needed. Twice, we turn the edges of the shelf bodice and sew.

We overcast the allowances and sew the sleeve’s lower seams. We sew after turning the sleeves’ bottom edges twice.

The skirt is evenly gathered around the waist before being stitched onto the elastic band. We use an overlock to finish the dress’s lower edge. We raise it by two to three centimeters and sew.

Long dress – tunic

Fits loosely; sizes range from 40 to 68.

Before sewing this beach dress, you must get ready:

  • fabric, chiffon, staple, poplin, thin knitwear will do, with a width of 1.5 m you need 3.0 m;
  • threads, sewing accessories.

Description

Since the tunic-kimono pattern is so straightforward, marking the fabric directly on it is advised. We choose the product’s duration based on our preferences. We consider the fact that the fabric consumption in this instance is two tunic lengths.

Mark out one piece by folding the fabric in half to create a 1.5 x 1.5 m square. Using the remaining material, cut out the belt.

Using a smooth arc, cut out the roll-out line at the corners.

Additionally, create a smooth arc cutout at the armpit corners. Sewing a line along this line will be more convenient.

Sew the side seams of the summer dress after folding it inside out. Process the overlock allowance cuts.

Use an overlock to finish the hem, lower sleeve, and neckline cuts. You can use a zigzag stitch to overcast the cuts if you don’t have an overlock.

Sew the incisions on the hem, sleeves, and neckline. Press every seam.

Sew the cut strips together for the belt, folding them right sides to right sides. Keep a 3-centimeter-long gap open. Flip the belt inside out, then hand-sew the exposed area using a blind stitch seam. Put some iron on the belt. The tee shirt is prepared!

Kimono-style blouse

What you need to sew a blouse is:

  • guipure;
  • nonsense;
  • finished braid bowl or fabric for its manufacture;
  • buttons to the color of guipure – 2 pcs.;
  • threads, sewing.

Description

Kimono blouse pattern with one -piece sleeve

A completed pattern for the direct dress’s foundation will be required. The coquet line will be drawn on it, and the pattern will be cut along this line.

We cut the pattern multiple times and push it out to get the desired volume of fabric along the coquette line. Until the desired value, the shoulder line keeps going. A goat is being mated with the side seam line at the bottom of the sleeve.

Before the shelf, we had already cut the back. When designing the back, we keep in mind that the right side of the object should be two centimeters longer than the left.

  • back – 1 part;
  • Fore – 1 part;
  • The gear coquet – 2 parts;
  • Left back coquet – 2 parts;
  • Right coquette – 2 parts.

All of the parts were cut out with a 1 centimeter seam allowance. Processing allowances of 1 cm for the sleeves and 3 cm for the blouse are included.

We use thin interlining to reinforce the yoke’s interior sections.

After pinning the shoulder seams on the outer and inner yokes with pins, we sew them on in pairs. If preferred, an extra strip of interlining can be inserted to reinforce the outer yoke seam; the excess can then be cut off near the stitching.

With their right sides facing one another, we fold the outer and inner yokes and secure them with pins. We machine stitch the rollout and rear edges.

We leave space for cutting at the corners and create notches along the rollout line without cutting all the way to the seam. This is done to prevent the fabric from being "pulled" after the allowances are turned.

We iron the yoke by turning it inside out. The bottom edges are basted or pinned.

We sew the sleeves, trimming the allowances to three to five millimeters. We use bias tape to process the edges. Guipure is the best material to use for blouses. In this instance, the product’s back will have a polished appearance.

The length of the lower edges of the yoke is equal to the length of the upper edges of the back, front, and sleeves (don’t forget to account for 2 cm of the yoke length for the overlap under the clasp).

You can either sew the yoke to the blouse’s lower sections or pin them together. Arrange one edge of the yoke over the other, overlapping by two centimeters. Stitch the yoke.

Use bias tape and trim the seam allowances to three to five millimeters. Sew allowances in the direction of the yoke.

See the photo below for a front-facing view of the product.

Sew the seams on the sides. Proceed with the seam allowances as previously mentioned.

Stitch a double fold along the lower edges of the blouse and sleeves.

Make two loops on the back yoke and stitch on buttons.

You have the option to embellish the blouse with beads, openwork stitching, or braiding for decoration.

Kimono-style dress with pockets

The dress is made from thin stretch denim.

Description

The main pattern dresses serve as the basis for modeling kimono dresses. Match the side seam line with the lower sleeve line and extend the shoulder line according to the sleeve size. We widen and deepen the neckline on the front and back patterns. We illustrate the undercut barrel in detail. Every construction—view the illustration below.

After positioning the patterns on the fabric, we make seam allowances.

Using the pocket burlap, we cut out the undercut barrel in a single piece. By using this method, fewer seams will be visible and superfluous fabric layer thickness will be avoided. The burlap’s fold lines are displayed by the dotted lines on the markings.

Both the pocket edge and the burlap’s lower edge are sewn. We cut the edge off.

We sew the inner edge of the burlap after folding it in half. The undercut barrel seam is folded and sewn.

Using an overlock, we process in one pass the edges of the burlap seam allowances and the undercut barrel.

We secure the burlap to the pocket seam. The shelf’s edge is constructed using a basting stitch. The seams are ironed.

We overlock the edges, iron the seam allowances, and stitch the back pieces along the center seam. We sew the shoulder seams, use an overlocker to finish the allowances, flip them over, and iron them.

We sew the sides together, use an overlocker to finish the allowances, flip them over, and iron them.

We use an overlock to finish the dress’s lower edge. After flipping the allowance to the wrong side, we sew.

We use the sleeves in the same way. We turn the allowance to the wrong side, overlock the lower edge, and stitch.

We made a small bias cut in order to process the neckline. We use bias tape to finish the edges of the neckline.

Japanese kimono – cape

  • fabric – thin, natural, best silk or chiffon – 1.5 x 0.9 m;
  • threads, sewing accessories.

Description

With the right side facing inside, fold the fabric in half.

Measure 15 cm left of the cuts and 25 cm vertically down from the fold line.

Draw lines at an angle along these marks. On the second side, repeat the markings in mirror image.

Using pins, secure the layers of fabric together, then cut following the lines.

Use a sewing machine to sew.

Determine the cape’s center and draw a vertical line there.

Cut the front pattern at the indicated cutting line. Fold the edges 2.5 cm inward, obliquely, and sew.

Cut out the roll-out at an angle after folding the back pattern in half. Handle the edges. The cloak is prepared!

Wearing a kimono with a single-piece sleeve lets you embrace the grace and simplicity of Japanese fashion. Whether you’re a novice or an expert sewer, this article will walk you through the cutting and sewing of this classic garment while providing helpful hints to help you create a beautifully constructed item.

Wrap kimono dress

You can sew a dress that has long sleeves and looks like a kimono robe using easy-to-use ready-made patterns. They fit a range of sizes.

By examining the dimensions listed below, you can select the appropriate option:

  • 36 (chest-waist-hips): 82-66-88 cm;
  • 38 (chest-waist-hips): 86-70-92 cm;
  • 40 (chest-waist-hips): 90-74-96 cm;
  • 42 (chest-waist-hips): 94-78-100 cm;
  • 46 (chest-waist-hips): 102-86-108 cm;
  • 48 (chest-waist-hips): 106-90-112 cm;
  • 50 (chest-waist-hips): 110-94-116 cm;
  • 52 (chest-waist-hips): 114-98-120 cm;
  • 54 (chest-waist-hips): 118-102-124 cm;
  • 56 (chest-waist-hips): 122-106-128 cm.

The selection of fabric and color scheme is crucial when it comes to robes styled like kimonos. For a cut like this, a floral print with coupons will look very nice. Selecting natural materials is preferable in terms of composition.

A kimono-style dress using a simple pattern

Cutting out a dress like this is very simple. The suggested structure is practically universal. Both size 44 and size 54 women will look good in it.

Cut the fabric according to the image.

Sew the front hem crosswise, following the pattern shown in the below photo.

Creating a belt and a drawstring.

Making a kimono with a single-piece sleeve is a distinctive way to experiment with traditional Japanese fashion while incorporating your own style. Both novice and seasoned sewers will find the design’s simplicity and the finished garment’s elegance to be highly suitable for this project.

As you proceed, keep in mind that meticulousness is essential. Proper cutting, sewing, and finishing will guarantee that your kimono feels good to wear in addition to being aesthetically pleasing.

Gaining proficiency in this method allows you to embrace a portion of Japanese history and culture in addition to creating a garment. Savor the experience and feel proud of the classic style you have made yourself.

Video on the topic

The French brand "Marc & Andre" offers to buy a women"s home kimono

beach kimono, beach tunic, beach clothes, Moscow clothing showroom, summer clothes #beach

DIY: Sewing a summer kimono cape | Haori

Women"s Kimono in Japanese Style

Creating an Elegant Kimono-Style Jacket. Part 1. Modeling. Master Class by Irina Mikhailovna.

Elegant Beach Dress with One-Piece Kimono Sleeve. Detailed review from Irina Mikhailovna.

What fabric do you most often choose for home textiles?
Share to friends
Dmitry Kornev

Interior designer and passionate fan of textiles. For me, fabric is not just a material, but a tool with which you can create coziness and style in any room. On this site I share my ideas and tips on how to use textiles in interior design to emphasize your individuality.

Rate author
Tkani-Furnitura.com
Add a comment