A traditional piece of clothing that gives a man’s ensemble a touch of refinement is the Ascot neckerchief. An Ascot can add a lot of style to any outfit, whether it’s for a formal event or just to dress it up. With the correct supplies and a little perseverance, sewing this sophisticated item at home is actually quite simple.
We’ll walk you through the process of making your own men’s Ascot neckerchief in this tutorial. From selecting the material to sewing the last details, you’ll discover how to create an Ascot that complements your outfit flawlessly. You don’t have to be an expert sewer to produce an appearance of professionalism.
You can create a distinctive and fashionable neckerchief that gives your outfit a personalized touch by adhering to the easy directions. Let’s get to work making a classic, adaptable, and uniquely you accessory.
Step | Details |
1. Choose Fabric | Select a lightweight fabric like silk or cotton for a smooth, elegant look. |
2. Cut the Fabric | Cut a rectangle of fabric measuring about 45 inches long and 6 inches wide. |
3. Fold and Press | Fold the fabric lengthwise with the right sides together, and press it to keep the fold in place. |
4. Sew the Edges | Sew along the long edge of the fabric, leaving a small gap to turn it inside out. |
- A bit of history
- How to sew a men"s Ascot neckerchief
- Scarf sizes
- How to choose fabric
- Important
- Men"s neck scarf for a shirt: how to construct a pattern
- Cutting out the detail
- How to sew a neck scarf for a man"s suit
- Important
- Drapery
- Sewing a men"s neck scarf: video master class
- How to tie a men"s neck scarf
- Ascot knot: MK video
- Video on the topic
- How to wear a neckerchief? #menstylist #mensneckerchief #neckerchief #howtotieaneckerchief
- how to tie short Ascot
- Issue #6: Ascot tie will add an aristocratic gloss to your image
- How to sew a men"s neckerchief – part 2
- How to tie a neckerchief to make it stylish. Ascot knot
- How to tie a neckerchief.Ascot knot
- Men"s neckerchief – a DIY gift for February 23
- Neckerchief | Ascot tie | How to tie
A bit of history
The history of this neckerchief begins in Old England, in the 19th century. The small village of Ascot, famous for the largest and most famous horse races on the entire European continent, attracted gentlemen from different cities and countries. A bright accent of men of that time was a neckerchief, and not a simple one, but tied in a peculiar way. Since then, this tie has been called Ascot, given to it in honor of that very village. In those years, it was a piece of fabric cut diagonally. It was tied much more simply than now: one corner of the scarf was placed on the chest over the shirt, and the other two were tied around the neck, bending it. The tails were hidden on the chest under a triangle. In the 21st century, the neckerchief was modified into a much more complex, but at the same time more convenient in the process of tying form. The most classic modern model that we will sew right now is practical from all sides: it has a convenient length, neat ends are easy to tuck into a shirt and do not interfere with wearing, and the width covers only the neck. We will also learn how to tie an extremely simple knot for every day, but first things first;)
How to sew a men"s Ascot neckerchief
We will require the following equipment and supplies for our work:
- tie silk or thick cotton;
- matching silk sewing threads;
- bead needle;
- sewing pins;
- sharp scissors;
- pattern paper;
- a simple pencil;
- chalk or soap;
- ruler.
Even a novice craftswoman can sew a scarf around their neck in no more than three hours.
Scarf sizes
There are various size options for neck scarves. Traditionally, dimensions are given in inches, with the length being represented by the first number and the width by the second.
Which size should I pick? This is directly influenced by the man’s height and preferences.
The four most used ratios are as follows:
For most men, who are between 170-180 cm tall, the second option—50 inches (127 cm in length)—is appropriate. Since such a product will appear more visually proportionate, we advise enlarging the width to 15 cm (by the way, American and Italian designers often use a neck scarf width of 14-15 cm).
Such a scarf is much easier to fold, and the results are much nicer.
How to choose fabric
Ascot scarves typically come in a limited range of colors and patterns and are fairly conservative in style. Typically, this scarf is a single-color tie in a subdued hue with a subtle pattern that is nearly undetectable. It is advised to sew it using dense fabric that is also flowy and translucent.
Dress fabrics are typically too thin and colorful, so it is important to choose thick silk or cotton since the fabric is cut on the bias. Our scarf is bilateral, meaning you can wear it on top of a traditional shirt using both sides. We advise using fabric with the same print on both sides because of this.
Look closely at the picture below, where the face and back of the silk are clearly visible. The pattern features a traditional tie stripe in addition to dots. Natural thick silk has light and dark sides with stripes of blue and gray. The dark side is dyed a deep blue color.
We will need to buy a 60 x 150 cm piece of fabric in order to sew one tie. This is more than sufficient; we will have enough silk left over to make a pocket square for a jacket.
Important
Our piece is made up of two parts that are sewn together in the middle. Cutting the entire length on the bias will only result in an almost two-fold increase in the consumption of expensive fabric, as this type of tie requires a center stitch, which we will explain later.
Men"s neck scarf for a shirt: how to construct a pattern
We now move on to the pattern. Since silk is a fairly loose fabric, we advise leaving 1.5 to 2 cm between seams when working with it. Our paper pattern should be 18 cm wide (15 cm + 1.5 cm for allowances on both sides) and 130/2 = 65 cm long, or precisely half the length of the finished product, in order to sew a men’s neckerchief.
At this point, create a clean right angle along the edge by bending the corner, as seen in the picture below, and fold the tracing paper in half lengthwise along the center for symmetry. Line up the paper’s edge with the fold line in the middle. Cut off in this manner:
We are left with a rectangular pattern that has one edge angled. The Ascot scarf is not designed to stretch or contract throughout its length; any additional changes are accomplished through fixed drapery.
Cutting out the detail
At this point, we must carefully and precisely transfer the completed pattern to a piece of silk, being careful not to disturb the silk’s smooth surface. Transfer the pattern to a cut on an ironing board or other slightly rough surface to accomplish this. Position the blank so that one corner is on the fabric’s cutting line (cut on the bias). Use a piece of chalk or soap to trace it.
Since seam allowances are already included in the pattern, place the next piece end to end.
Four fabric blanks will be used in our project. Take well-sharpened scissors and trace around each one.
How to sew a neck scarf for a man"s suit
Next, sew the product directly. Using the thinnest beading needle and thin silk threads, combine the blanks in the center with their faces facing each other (two blue and two gray sides in pairs). Sew them with tiny basting stitches.
Use the "silk" or "delicate fabrics" iron mode and carefully iron all of the seams into two sides.
Next, unfold every piece of the scarf and fold it back into a face-to-face configuration.
Join by centering the seams, then delicately secure with pins. We take them on a full perimeter walk. Sweep the two pieces together, allowing about 15 cm of space at one edge in the center for reversing the tie. Sew the scarf very carefully, keeping an eye on the line, and paying close attention to the corners—they should be even and clear.
Important
Cut off the seam allowance in the center of the corner as carefully as possible before turning the product inside out, close to the edge. We can’t form a clean, crisp corner if you don’t do this. Check out how to do this:
Cut the remaining allowances carefully to 1 cm. Turn the scarf so that it faces front.
A brief word on tie replication now. Since Ascot is still a scarf, you shouldn’t duplicate its inner sides in order to avoid giving the product an excessive amount of density. The scarf’s fabric should naturally fall into folds, highlighting its organic appearance. We also advise against sewing the product’s perimeter from the front for the same reason.
It is now necessary to carefully form sharp corners and straighten all of the seams.
Iron the nearly completed item using the "delicate fabrics" setting, using a very gentle iron. We then use blind stitches to finish sewing, tucking the silk fabric’s edges inside the raw cut (the 15 cm we had previously left for turning the scarf inside out).
Drapery
We start forming the narrow section, which will sit squarely on the neck.
Ultimately, we want to achieve tidy drapery with three folds in the tie’s center. At its narrowest point, the product’s final width should be roughly 5 cm. The folds must be carefully ironed and stitched across the middle, precisely where the center seam runs, as well as 25–27 cm to its left and right.
On one side, we start forming the folds by stepping back 5 mm from the edge and laying a 2 cm fold. After that, flip it over and carry out each step exactly the same way on the other side. The remaining fabric is folded into a 2 centimeter square. The side folds are arranged in a single direction, one on top of the other. Baste.
Sew them together. Lightly iron and baste each fold for better symmetry.
That’s it; the neck scarf with two sides is ready! It looks great worn alone with a simple shirt for daily wear or accessorized with a brooch or pin for special events.
Sewing a men"s neck scarf: video master class
How to tie a men"s neck scarf
This is really easy: just drape the scarf around your neck and cross its ends across your chest. As seen in the picture, toss the right end over the left in a downward motion and pass it through the throat region. Place this end of the scarf against your chest and fold it over to meet the other end. Without fastening the shirt’s top two buttons, the knot created during these manipulations is positioned behind the collar and its ends are concealed on the chest.
Additional knot choices:
A men’s Ascot neckerchief sewn by hand is a quick and classy way to give any ensemble a timeless feel. This tutorial will help you select the appropriate fabric, cut it to size, and sew it together with the least amount of time and supplies. This step-by-step tutorial will assist you in making a chic accessory that can be worn to both formal and informal events, regardless of your sewing experience.
Ascot knot: MK video
A men’s Ascot neckerchief is a satisfying project that lends refinement to any ensemble. All you need is a small piece of fabric, some basic sewing knowledge, and meticulous attention to detail to make a fashionable and unique accessory.
Choosing the appropriate fabric, cutting, and sewing the pieces together is a simple but rewarding process. To guarantee a tidy finish, it’s important to take your time taking measurements and sewing.
After you’ve gotten the hang of things, you can play around with different materials and designs to suit your own style. Making an Ascot as a unique gift or for a special occasion will yield an impressive result.